Non-standard door professional measurement method
1. In the non-standard door market, the width of the current gate opening is basically around 2100~2380, and the height of the gate opening is around 2720~2900. In order to ensure the smooth, atmospheric, practical and basic proportion and overall beauty of the gate, reserve the opening or Please pay attention to the above dimensions as much as possible when renovating door openings in old houses. (For customers who renovate old houses and have not demolished the old door, matters needing attention when renovating the door opening)
2. The decorative effect of the imitation copper luxury door cover is relatively atmospheric, beautiful and luxurious. At present, many customers choose it. If the installation site allows, it can be considered.
3. According to folk customs and Feng Shui, the level of the back door is generally about 5 work points higher than that of the front door. When copying the horizontal line, you should pay attention to these.
4. When signing a contract with a customer and needing to measure the size of the door opening, the customer must clarify the 5-12 items to ensure that the size measurement can be carried out quickly and accurately.
5. The horizontal line must be copied accurately. The determination of the horizontal line should be negotiated with the master bricklayer before the measurement. It should be determined according to the overall height of the house and the outside, the thickness of the ordered floor tiles, and the level and smoothness of the original floor in the house. Make striking marks.
6. The outer wall and inner wall have been painted once, and the thickness is basically uniform. First, determine how to decorate the outer wall: dry hanging marble (total thickness 6 cm) Note (the total thickness includes the surface layer and the filler added during construction Thickness); wet hanging marble (total thickness of 4 points); ordinary exterior wall tiles (total thickness of 2.5 cm), the above three cases must be tiled before installing the door. The latter is a special case of hemp bricks, and the door must be installed before the bricks are installed (the above is the situation in the basic plane. If the outer wall is not flat, the ash should be thickened, and the actual measurement should be subject to the master bricklayer) .
7. There are generally four kinds of interior wall decoration: dry-hanging marble (total thickness 6 cm); wet-hanging marble (total thickness 4 cm); ordinary interior wall tiles (total thickness 2.5 cm); or only paint (ordinary putty ash) The total thickness of the coating layer is generally 0.8 cm). The inner wall must be installed with a door before construction (the above is the situation in the basic plane. If the inner wall is not flat, the powder should be thickened, and the actual measurement should be subject to the master bricklayer).
8. Before determining the decoration construction plan and materials, please negotiate more with designers, constructors and family members, and do not change it easily after confirmation. Especially after our company has completed the measurement, otherwise the installation effect will not be guaranteed (the customer will bear the cost of installing accessories or construction remediation). Under normal circumstances, when the customer wants to change the construction method of the inner and outer walls, Be sure to notify our company's business personnel to re-determine the depth dimension within 24 hours after the measurement has been completed.
9. If the outer wall is not hemp bricks, the wall tiles must be pasted before the door is installed, and the tiles should be covered as fully as possible. The maximum allowable distance is from the outer edge of the deep edge of the doorway wall to the edge of the upper, left, and right three sides of the tiled part of 3 cm. (In order to ensure the effect of wrapping the edge flat and fastened to the wall); In addition: when the imitation copper door sleeve is installed, the maximum allowable distance is 18 cm from the outer edge of the deep edge of the doorway wall to the edge of the tiled part on the upper left and right sides (to ensure that The effect of wrapping the edge flat and fastened to the wall).
10. When the product is installed and start to paste the interior wall tiles, adjust the thickness of the gray layer so that the brick surface and the back of the door frame are on the same level. When tiling, use the back of the vertical beam of the door frame as the horizontal reference of the wall, and spread it to both sides during construction. , to avoid the formation of concave and convex joints on the same surface as the horizontal surface of the back of the door frame (if the construction is applied to both sides, the right-angle closing of the tiles and the tiles at the corners can be very easy to be beautiful).
11. When there is an imitation copper luxury door cover configuration, it is necessary to ensure that the size of the edge from the plane of the ceiling to the top of the door hole is greater than 36 cm after construction. The ceiling construction must be carried out after the imitation copper door cover is installed. The best distance for the ceiling is between 510 cm, and pay attention to this size when suspending the ceiling. (If the distance is too small, it will be depressing and compact, and if the distance is too large, it will be empty and incoherent.) In addition, when the size of the window cover exceeds 10 cm, please inform the sales staff of our company, which will not be suitable for ordinary edging, and must use imitation copper door cover. Guaranteed effect.
12. The net height of the window sash in the window with the same door on an outer wall must be determined after the door is installed ("that is, the window is fixed by the door"), so as to ensure that the height of the middle beam of the door frame is parallel to the height of the middle beam of the window The straight line position (at the same time the highest point of the door leaf is in the same straight line with the highest point of the window sash) makes the overall effect harmonious and beautiful. Prevent the height difference between the door leaf and the window sash from being too different to cause unevenness, and the uneven height will seriously affect the decorative effect of the outer wall of the entire building. If the door and window need to be constructed at the same time due to the construction progress, please ask the manufacturer of the window to call the manufacturer of the door when deciding the height of the window sash.
